非離子聚丙烯酰胺 Nonionic Polyacrylamide
產品特性Product Features
該產品是丙烯酰胺單體的均聚物,經造粒、干燥、粉碎而成,離子化程度低。產品外觀呈白色顆?;蚍勰┕腆w狀。絮凝性能受水pH值和鹽類波動的影響小。在酸性條件下優于陰離子型,絮凝強度比陰離子型高分子絮凝劑的強。
The product is the polymer of acryl amide monomer which formed after granulation, drying and crushing , with low degree of ionization. The product appears white solid particles or powder. Flocculation performance is affected little by the fluctuation of the water pH and salt. It is better than anionic under acid condition and flocculation strength is better than anionic polymer flocculants.
![](http://zs1.img-1.com/pic/156561/p2/20160902152116_7365_zs_sy.jpg)
我公司聚丙烯酰胺在建筑膠水領域得到廣泛應用
聚丙烯酰胺在建筑膠水里可廣泛替代傳統的丙烯酰胺。丙烯酰胺膠水較大的缺點就是沒有強度和施工時干燥速度快,主要原因是它的分子結構是呈線狀排列,而聚乙烯醇有強度是因?yàn)樗姆肿咏Y(jié)構是呈網狀結構.而聚丙烯酰胺是高分子鏈狀結構,可以大大提高膠水強度并使施工時干燥速度明顯降低,利用了聚丙烯酰胺非常好的保水性,施工時決不會出現干燥太快,拉毛起皮等不良現象。
我公司分子量1800萬陰離子聚丙烯酰胺在建筑膠水領域得到了廣泛應用。該產品在建筑膠水主要起絮凝、保水、增稠、粘合、潤滑等作用,由于其有超高的粘度,并且由于其特殊分子結構,有很好保水效果。使用者普遍反應該產品具有用量省,粘度大,添加后有利于施工,能提高施工效率,施工效果更好等優點。
![](http://zs1.img-1.com/pic/156561/p2/20160905152418_6043_zs.jpg)
![](http://zs1.img-1.com/pic/156561/p2/20160902152112_7633_zs.jpg)
聚丙烯酰胺---采礦、洗煤領域
采用聚丙烯酰胺作絮凝劑可促進采礦、洗煤回收水中的固體物沉降,使水澄清,同時可回收有用的固體顆粒,并避免對環境造成污染。
Using polyacrylamide as flocculant can promote the solid content of settlement in mining, coal washing, make the water clear, recycle useful solid particles at the same time, also avoid damage to the environment .
![](http://zs1.img-1.com/pic/156561/p2/20160905152425_4237_zs.jpg)
![](http://zs1.img-1.com/pic/156561/p2/20160905152423_5226_zs.jpg)